Dallas Theater is a First on Many Levels

McCarthy Building Companies constructs $84-million theatre that’s first of its kind in the world

Imagine a high-rise theater equipped with a glass-walled performance hall that possesses the ability to morph into three different seating configurations. Now imagine that this building is constructed from the top down with a minimal use of structural support columns. Sound impossible? Skeptics said it couldn’t be done, but the recently opened $84-million AT&T Performing Arts Center (AT&T PAC) Dee and Charles Wyly Theatre has proven the cynics wrong. Located in northeastern downtown Dallas, the 12-level, 80,300-sq-ft multiform theater is the only one of its kind in the world — and not just because of its unique architecture.

“Typically, theaters are constructed horizontally so that the back house and support spaces are located behind and to the sides of the stage,” says Bryon Pfaff, MEP project manager for the Texas division of McCarthy Building Companies, the firm that constructed the theater. “With this project, everything is vertically stacked, so you’ve got the main performance chamber located at ground level, and the support spaces are located above and below this main chamber.”

Workers installed a “basket weave” of conduit at the Dee and Charles Wyly Theatre in Dallas.

Resembling a tall steel box thanks to the use of exterior aluminum cladding, three of the performance hall’s 30-ft walls are made from 2-in.-thick glass, giving as many as 600 patrons a view of the Dallas skyline when feasible (blackout blinds can be automatically opened or closed for performances). The fourth wall contains the elevators as well as the building’s support systems.

“The building’s footprint is fairly small — only 130 sq ft by 100 sq ft — yet the amount of conduit needed for the performance lighting and the video and sound was immense,” notes Pfaff. “One of the requirements was that none of the conduits or junction pull boxes could be exposed. So a big challenge was trying to find space for all that conduit.”

According to Pfaff, the extensive use of 3D drawings prior to installation along with a 3-layer “basket weave” of conduit within the 1-ft-thick floor slabs helped ensure everything fit. The theater’s distinctive seat towers, which allow for multiple seating configurations — proscenium, thrust, and flat floor — also tested McCarthy’s skills.

“The seat towers are basically three levels of structural steel bleachers attached to scoreboard hoists,” Pfaff explains. “Depending on the performance needs, the seat towers, which have removable chairs attached to them, can be lifted above the catwalk. This required us to devise a safety system so that when the seat tower drawbridges were lifted, they released a set of contacts that locked out the elevators and doors on that floor to prevent anyone from accidentally walking onto that floor and falling down three levels.”

As with most new construction, the Wyly Theatre contains a host of sustainable design features, including radiant piping in the lobby, chilled water beams, the liberal use of fluorescent lighting fixtures, and utilization of lighting and dimming controls in rest rooms, dressing rooms, and office spaces.

“The outdoor lighting consists of a vast amount of in-grade LED luminaires that were custom designed for this project,” adds Pfaff. “The difficult aspect is that the drivers for the lights live in the fixtures. It’s hard to keep them watertight.”

Despite the numerous challenges, the 33-month-long project finished on time, welcoming its first guests last fall.


Want to use this article? Click here for options!





Acceptable Use Policy
blog comments powered by Disqus

what's wrong here?

What's Wrong Here?

May 10, 2012 12:44 PM

What's Wrong Here?

Apr 19, 2012 10:09 AM

What's Wrong Here?

Apr 5, 2012 2:27 PM

View all What's Wrong Here?

product spotlight

Solar kit

May 18, 2012 8:21 AM

Solar kit

Designed to support the company’s Piccolo and Concerto C2000 MCUs, the Solar Explorer kit features a non-isolated design ...

View all 2012 Product Spotlights

Free Product Info

Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.

Recent Comments

More...


Social Media

More ways to stay informed...

follow us on twitter

Find us on Facebook

EC&M Whitepaper

Arc Mitigation –A Three-Step Approach

Did you know that an arc-flash incident hospitalizes 5-7 workers per day in North America, severely impacting processes and profitability with lost production? Download This Sponsored Whitepaper Today!

What's New in Residential Cabling?
Date: Wednesday, May 30, 2012
Time: 2:00pm ET


In this The Home Depot sponsored Low Voltage Webinar, Ron Kipper RCDD / NTS will discuss the need for compression style coaxial connectors and the migration of the entire CATV, Satellite and Audio / Video industry to them. Register Today!

Grounding Versus Bonding
Date: Thursday, May 24, 2012
Time: 2:30pm ET


In this 60-minute FREE webinar, Mike Holt of Mike Holt Enterprises, Inc. will explain the purpose of grounding and bonding as related to the most current requirements set forth in the 2011 NEC. Register Today!

resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

industry links

industry links

rss icon

rss

Browse Back Issues

Browse Back Issues