CPSC and HUD Issue Updated Remediation Protocol for Homes with Problem Drywall

Study finds no evidence of a safety hazard to home electrical systems

The U.S. Consumer Product Safety Commission (CPSC) and the U.S. Department of Housing and Urban Development (HUD) are issuing an updated remediation protocol for homes with problem drywall. A study conducted on behalf of CPSC by Sandia National Laboratories in New Mexico, finds no evidence of a safety hazard to home electrical systems. Sandia simulated long-term exposure of wiring and other electrical components to hydrogen sulfide gas, which is associated with problem drywall.

Based on this study, CPSC and HUD staff, representing the Interagency Task Force on Problem Drywall, are no longer recommending the removal of all electrical wiring in homes with problem drywall. This change in the government's protocol may reduce the cost of remediation for many homes.

After simulating more than 40 years of corrosive conditions that could exist in problem drywall homes, Sandia staff did not observe any acute or long-term electrical safety events, such as smoking or fire. Corrosion and blackening of the exposed electrical components did occur and was observed to be consistent with the characteristic corrosion reported to CPSC by thousands of consumers. Based on this study, it is the belief of the staffs of CPSC, HUD, and Sandia that long-term exposure of wiring and other electrical components to hydrogen sulfide gases does not indicate a safety hazard to a home's electrical systems.

With these changes, the remediation guidance for homes with problem drywall calls for the replacement of all:

  • problem drywall
  • fire safety alarm devices, including smoke and carbon monoxide alarms
  • electrical distribution components, including receptacles, switches and circuit breakers
  • gas service piping and fire suppression sprinkler systems.

CPSC and HUD staffs are also issuing an updated identification guidance, which broadens the range of installation years of affected homes to include homes where drywall was installed as late as 2009. Importantly, the drywall installed in 2009 had been previously imported during the years 2006 to 2007 and does not represent any new importation of problem drywall.

The staffs of CPSC and HUD believe that the updated identification and remediation protocols will enable homeowners to correctly identify homes containing problem drywall and comprehensively remediate those homes to address any potential health and safety issues associated with the problem drywall.

CPSC is in the final stages of completing its scientific investigation into problem drywall. For additional findings from the Interagency Drywall Task Force's investigation, visit www.drywallresponse.gov.


Want to use this article? Click here for options!





Acceptable Use Policy
blog comments powered by Disqus

what's wrong here?

What's Wrong Here?

May 10, 2012 12:44 PM

What's Wrong Here?

Apr 19, 2012 10:09 AM

What's Wrong Here?

Apr 5, 2012 2:27 PM

View all What's Wrong Here?

product spotlight

Solar kit

May 18, 2012 8:21 AM

Solar kit

Designed to support the company’s Piccolo and Concerto C2000 MCUs, the Solar Explorer kit features a non-isolated design ...

View all 2012 Product Spotlights

Free Product Info

Our Product Information site is the ultimate online resource for products and services offered by Advertisers featured in our Magazine. This service is provided as a quick and easy way to request Product Information online. Get FREE product information now.

Recent Comments

More...


Social Media

More ways to stay informed...

follow us on twitter

Find us on Facebook

EC&M Whitepaper

Arc Mitigation –A Three-Step Approach

Did you know that an arc-flash incident hospitalizes 5-7 workers per day in North America, severely impacting processes and profitability with lost production? Download This Sponsored Whitepaper Today!

What's New in Residential Cabling?
Date: Wednesday, May 30, 2012
Time: 2:00pm ET


In this The Home Depot sponsored Low Voltage Webinar, Ron Kipper RCDD / NTS will discuss the need for compression style coaxial connectors and the migration of the entire CATV, Satellite and Audio / Video industry to them. Register Today!

Grounding Versus Bonding
Date: Thursday, May 24, 2012
Time: 2:30pm ET


In this 60-minute FREE webinar, Mike Holt of Mike Holt Enterprises, Inc. will explain the purpose of grounding and bonding as related to the most current requirements set forth in the 2011 NEC. Register Today!

resources

product info icon

product info

tradeshow icon

tradeshow

research icon

research

industry links

industry links

rss icon

rss

Browse Back Issues

Browse Back Issues