Vertical Clearance Requirements for Service Drop

April 2, 2014
Clearance requirements for overhead services are outlined in Sec. 230.24(A) through (E).

The requirement to maintain a 3 ft vertical clearance from the edge of a roof does not apply to the final conductor span where the service drop is attached to _____.

a) a service pole
b) the side of a building
c) an antenna
d) the base of a building

See answer and applicable Code reference

The correct answer is: b) the side of a building

Article 230 covers the requirements for Services. Clearance requirements for overhead services are outlined in Sec. 230.24(A) through (E). Although it's noted in 230.24(A) that you must maintain the specified vertical clearance above the roof for a distance of 3 ft in all directions from the edge of the roof, there are a few exceptions to this requirement. As noted in Exception No. 4, "The requirement for maintaining the vertical clearance (3 ft) from the edge of the roof shall not apply to the final conductor span where the service drop is attached to the side of the building."

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.