Using Vegetation As a Means of Support

March 25, 2014
As noted in the 2011 NEC, vegetation shall not be used for support of overhead spans of branch circuits or feeders.

Vegetation shall not be used to support overhead conductor spans of _____ for temporary installations.

a) branch circuits
b) feeders
c) a or b
d) none of the above

See answer and applicable Code reference

The correct answer is: c) a or b

The general requirements for temporary installations can be found in Sec. 590.4 of the 2011 NEC. As noted in 590.4(J), "Cable assemblies and flexible cords and cables shall be supported in place at intervals that ensure that they will be protected from physical damage. Support shall be in the form of staples, cable ties, straps, or similar type fittings installed so as to not cause damage. Vegetation shall not be used for support of overhead spans of branch circuits or feeders."

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.

8 Types of Electrical Conduit and Their Uses

Electrical conduit is a tube or raceway used to house and protect electrical wires within a building or structure. From data centers to underground subways to ports and bridges...

Champion Strut Catalog

Champion Fiberglass is the most advanced manufacturing facility of fiberglass conduit, fiberglass bridge drain and fiberglass strut systems in the world. Its well-trained and ...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...