1. Code Quiz of Day

Show-Window Lighting Load Calculations

April 30, 2014
You'll find feeder and service load calculation requirements in Part III of Art. 220 of the 2011 NEC.

The minimum feeder load for show-window lighting is _____ per linear foot.

a) 180VA
b) 200VA
c) 300VA
d) 400VA

See answer and applicable Code reference

The correct answer is: b) 200VA

You'll find feeder and service load calculation requirements in Part III of Art. 220 of the 2011 NEC. As noted in Sec. 220.43(A), "For show-window lighting, a load of not less than 660VA/linear meter or 200VA/linear foot shall be included for a show-window, measured horizontally along its base."

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Continue Reading

Sponsored Recommendations

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.

8 Types of Electrical Conduit and Their Uses

Electrical conduit is a tube or raceway used to house and protect electrical wires within a building or structure. From data centers to underground subways to ports and bridges...

Champion Strut Catalog

Champion Fiberglass is the most advanced manufacturing facility of fiberglass conduit, fiberglass bridge drain and fiberglass strut systems in the world. Its well-trained and ...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...