Junction Boxes for Sensitive Electronic Equipment

May 23, 2014
Article 647 covers the installation and wiring of separately derived systems operating at 120V line-to-line and 60V line-to-ground for sensitive electronic equipment.

Junction boxes used in sensitive electronic equipment systems shall be clearly marked to indicate _____.

a) the system frequency
b) the system voltage
c) the distribution panel
d) b and c

See answer and applicable Code reference

The correct answer is: d) b and c

Article 647 covers the installation and wiring of separately derived systems operating at 120V line-to-line and 60V line-to-ground for sensitive electronic equipment. As noted in 647..4(B), "All junction boxes shall be clearly marked to indicate the distribution panel and the system voltage."

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.