Blog Contributors

Testing Generators with a Portable Load Bank

As covered in my previous blog post, all diesel-powered generators should be loaded to at least 30% of their standby nameplate rating when exercised during their monthly test....More

Michael Eby

Mike received a B.S. degree in electrical engineering in 1986 and an M.S. degree in engineering management in 1994 from the University of South Florida. He is currently a member of the National Fire Protection Association (NFPA), Institute of Electrical and Electronics Engineers (IEEE),...

in Industry Viewpoint Mar 18, 2016

2017 NEC Revisions Address a Rapidly Changing Power Production Market 

In case you haven’t noticed, there’s quite a buzz of activity taking place on the renewable energy, on-site power generation, and energy storage fronts....More

Philip F. Keebler

Keebler is a principal engineer and partner at KCE Engineering, LLC located in Knoxville, Tenn. He is an 18-year veteran of the Electric Power Research Institute (EPRI) in the Energy Utilization Group of the Power Delivery & Utilization sector. His work at EPRI also involved the...

in Industry Viewpoint Jan 07, 2013

Power Quality for Commercial and Industrial Customers with a Focus on Energy-Efficiency (EE) Technologies

The development and installation of EE technologies are growing by leaps and bounds in the areas of lighting, HVAC, appliances, and more. EE technologies are often designed using new principles....More

Joseph R. Knisley

Joe earned a BA degree from Queens College and trained as an electronics technician in the U.S. Navy. He is a member of the IEEE Communications Society, Building Industry Consulting Service International (BICSI), and IESNA. Joe worked on the editorial staff of Electrical Wholesaling...

Electrical Testing Feed
Join the Discussion on EC&M Talk

EC&M Webinars
Sep 10, 2015
Sponsored

ON DEMAND: An Effective Electrical Safety Program that Delivers

This hour-long webinar will cover the wording in various IEEE recommended practices, NFPA 70E and ANSI Z10 with an emphasis on what it means in terms of designing, implementing and managing an Effective Electrical Safety Program....More
Jul 21, 2015
Sponsored

ON DEMAND: Mitigation Methods for Arc Flash Hazards - Enhancing Personal Safety

The energy released during an arc flash event can result in severe damage to personnel, equipment, and property. While there are solutions which seek to improve the protection for each, this program will focus on personnel....More
EC&M Learning Center

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×