Ecmweb 8874 Opinion 11
Ecmweb 8874 Opinion 11
Ecmweb 8874 Opinion 11
Ecmweb 8874 Opinion 11
Ecmweb 8874 Opinion 11

2017 NEC Revisions Address a Rapidly Changing Power Production Market

March 18, 2016
In case you haven’t noticed, there’s quite a buzz of activity taking place on the renewable energy, on-site power generation, and energy storage fronts.

In case you haven’t noticed, there’s quite a buzz of activity taking place on the renewable energy, on-site power generation, and energy storage fronts. Everyone — from state legislators/regulators to utility executives to building owners/operators — is trying to sort through the myriad of integration and operating challenges that accompany these new developments.

As design engineers, systems integrators, and installers forge ahead with new designs for these energy supply projects, the safety of the individuals who will operate and maintain these systems must not be ignored. That’s why the dedicated members of the NEC Code-Making Panels have been working hard to address this issue in the 2017 Edition of the NEC, which is scheduled to be published later this year.

At this point in time, it looks like four new Articles in this edition of the Code will focus on the generation, distribution, and interconnection of energy. They include:

Article 691, Large-Scale Photovoltaic (PV) Electric Supply Stations — As noted in the Scope, this proposed Article covers “the installation of large-scale PV electric supply stations operated for the sole purpose of providing electric supply to a system operated by a regulated utility for the transfer of electrical energy with a generating capacity of no less than 5,000kW. Electric supply stations are locations containing the generating stations and substations, including their associated generator, storage battery, transformer, and switchgear areas. Facilities covered by this article have specific design and safety features unique to large-scale PV facilities as indicated in 691.4.”

Article 706, Energy Storage Systems — As noted in the Scope, this proposed Article “applies to all permanently installed energy storage systems (ESSs) operating at over 50V AC or 60V DC that may be stand-alone or interactive with other electric power production sources.”

Article 710, Stand-Alone Systems — As noted in the Scope, this proposed Article “covers electric power production sources operating in stand-alone mode.”

Article 712, DC Microgrids — As defined in Sec. 712.2 of this proposed Article, “a direct current microgrid is a power distribution system consisting of one or more interconnected DC power sources, supplying DC-DC converters, DC loads, and/or AC loads powered by DC-AC inverters. A DC microgrid is typically not directly connected to an AC primary source of electricity, but some DC microgrids interconnect via one or more DC-AC bidirectional converters or DC-AC inverters.”

Although the specifics of these new rules and requirements won’t be completely finalized for a couple of months, I thought it was important to bring the work being done in this area to your attention now. The timing seemed right, especially since our cover story this month focuses on the developments taking place in the area of zero net energy (ZNE) buildings. As freelance writer Tom Zind points out in his article, “The Balancing Act,” achieving ZNE status can only be accomplished with an on-site alternative energy generation component. However, the complexities of net metering issues and building control performance present many challenges to those involved in these types of projects.

About the Author

MIKE EBY | Senior Director of Content - Buildings

Mike received a B.S. degree in electrical engineering in 1986 and an M.S. degree in engineering management in 1994 from the University of South Florida. He is currently a member of the National Fire Protection Association (NFPA), Institute of Electrical and Electronics Engineers (IEEE), Association of Energy Engineers (AEE), and American Society of Business Press Editors (ASBPE).

Prior to joining EC&M as Editor-in-Chief in September 1999, Mike served as the Executive Editor of Transmission & Distribution World magazine for five years. Before joining Penton Media, Mike held various engineering titles within the Substation and Transmission Engineering Groups at Florida Power & Light Co., Juno Beach, FL.

Mike was awarded the Southeastern Electric Exchange (SEE) Excellence in Engineering Award in 1993 and has received numerous regional and national editorial awards for his reporting and writing work in the electrical market.

Voice your opinion!

To join the conversation, and become an exclusive member of EC&M, create an account today!

Sponsored Recommendations

Electrical Conduit Comparison Chart

CHAMPION FIBERGLASS electrical conduit is a lightweight, durable option that provides lasting savings when compared to other materials. Compare electrical conduit types including...

Fiberglass Electrical Conduit Chemical Resistance Chart

This information is provided solely as a guide since it is impossible to anticipate all individual site conditions. For specific applications which are not covered in this guide...

Considerations for Direct Burial Conduit

Installation type plays a key role in the type of conduit selected for electrical systems in industrial construction projects. Above ground, below ground, direct buried, encased...

How to Calculate Labor Costs

Most important to accurately estimating labor costs is knowing the approximate hours required for project completion. Learn how to calculate electrical labor cost.