Sarosh Patel

Sarosh
Patel
Lawrence Hmurcik, LLC
Articles
The Case of the Non-Electric Sign Electrocution  2
When a four-man crew took on the installation of two non-electric advertising signs for an automobile repair shop, the threat of electrical hazards seemed virtually nonexistent.
The Case of the VFD Clock Culprit 
The day started out like any other for one electrical technician employed by a variable-frequency drive (VFD) manufacturer.
The Case of the Multimeter Meltdown  4

For a master electrician and his two assistants, working at a large food warehouse proved to present continuous challenges.

The Case of the Hurried Electrician  6
A business man who had recently bought a building for use as a car repair shop knew from the start that he had a number of electrical problems to solve.
The Case of the Misidentified Pump Switches 2
Technician working in well is electrocuted after making contact with live wire from mislabeled switch
The Case of the Mismatched Capacitors 1
Technician is burned, suffers muscle/organ damage during high-voltage test procedure.
The Case of the Plasma Spray Catastrophe
Behind the arc blast that left factory technician with third-degree burns
Electrical Testing Feed
Join the Discussion on EC&M Talk

EC&M Webinars
Jul 21, 2015
Sponsored

Mitigation Methods for Arc Flash Hazards - Enhancing Personal Safety

The energy released during an arc flash event can result in severe damage to personnel, equipment, and property. While there are solutions which seek to improve the protection for each, this program will focus on personnel....More
Jul 14, 2015
Sponsored

Understanding the 2015 Edition of NFPA 70E and the Arc Flash Hazard

Get more information on the important changes to the 2015 edition of NFPA 70E. More specifically, this event will address hazard analysis and FR clothing performance testing, focusing on the quantification of incident energy and ATPV (or Arc Rating)....More
EC&M Learning Center

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×