Chuck Yung

Senior Technical Support Specialist,
Electrical Apparatus Service Association

Yung is a senior technical support specialist for the Electrical Apparatus Service Association (EASA). He is also a Senior Member of IEEE, and is currently chair of their IEEE 1068 working group.  He has been involved in the rotating equipment repair industry since 1974.  Yung has authored more than 130 technical papers, including several published in the IEEE Industry Applications magazine.

Overcoming Junction Box-to-Motor Mounting Deficiencies 3
Some plants ground the motor frame; others only connect the ground to the J-box.
The ABCs of Bearing Inspection 1
Many of you have good in-house predictive maintenance departments, and others outsource that work to others.
Common Recommendations for Stored Motors 
When an electric motor will be stored a long time before being placed in service, you must take certain steps to ensure it will be suitable for operation when it’s needed.
Electrical Testing Feed
Join the Discussion on EC&M Talk

EC&M Webinars
Jul 21, 2015

Mitigation Methods for Arc Flash Hazards - Enhancing Personal Safety

The energy released during an arc flash event can result in severe damage to personnel, equipment, and property. While there are solutions which seek to improve the protection for each, this program will focus on personnel....More
Jul 14, 2015

Understanding the 2015 Edition of NFPA 70E and the Arc Flash Hazard

Get more information on the important changes to the 2015 edition of NFPA 70E. More specifically, this event will address hazard analysis and FR clothing performance testing, focusing on the quantification of incident energy and ATPV (or Arc Rating)....More
EC&M Learning Center

Connect With Us

Sponsored Introduction Continue on to (or wait seconds) ×